Ị nọ ebe a:
Sistemụ Mkpokọta Ngwakọta akpaaka PVC
Jụọ ase
| 1.Incoming raw Material | |
| Akụrụngwa | HR,CR carbon ígwè eriri igwe |
| Ike ọdụdọ | σb≤600Mpa |
| Mpụta Ike | σs≤315Mpa |
| Ogologo eriri | 40 ~ 103 mm |
| OD nke igwe igwe | Oke.Φ2000 mm |
| ID nke igwe igwe | Φ508 mm |
| Ibu nke igwe igwe igwe | Oke.2.0 ton / eriri igwe |
| Ọkpụrụkpụ mgbidi | Ọkụ okirikiri: 0.25-1.5mm |
| Mpaghara & akụkụ anọ: 0.5-1.5mm | |
| Ọnọdụ mgbawa | N'ọnụ ọnụ |
| Mwepu ndidi ịdị arọ | Oke.± 5% |
| Mwepu obosara ndidi | ± 0.2mm |
| Mwepu camber | Oke.5mm/10m |
| Burr elu | ≤ (0.05 x T) mm (T — ọkpụrụkpụ ọkpụrụkpụ) |
| 2.Machine ike | |
| Ụdị: | PL-32Z Ụdị ERW Tube Mill |
| Ntuziaka ọrụ | TBA nke onye na-azụ ahịa |
| Nha ọkpọkọ | Ọkụ okirikiri: Φ 10~ Φ 32.8 mm * 0.5 ~ 2.0 mm |
| Mpaghara: 8 × 8 ~ 25.4 × 25.4 mm * 0.5 ~ 1.5 mm | |
| Rektangle: 10× 6 ~ 31.8 × 19.1 mm (a/b≤2:1) * 0.5 ~ 1.5 mm | |
| Ọsọ imewe | 30-90m/min |
| Nchekwa warara | Igwe kwụ ọtọ |
| Mgbanwe rola | Na-agbanwe rola site n'akụkụ |
| Moto ọkwọ ụgbọ ala isi igwe | 1 set * DC 37KWX2 |
| Ugboro dị elu steeti siri ike | XGGP-100-0.4-HC |
| Mpempe akwụkwọ mpịakọta Ụdị | 2 pcs mpịakọta ụdị |
| Ịcha osisi | Igwe ọkụ na-efe efe/Oyi na-efe efe |
| Tebụl mkpuchi | 9m (Ogologo okpokoro dabere na Max.ogologo ọkpọkọ = 6m) |
| Ụzọ tumbling | Tebụl otu akụkụ agwụla |
| 3. Ọnọdụ ọrụ | |
| Isi iyi ọkụ eletrik | voltaji ọkọnọ: AC 380V ± 5% x 50Hz ± 5% x 3PHControl voltaji: AC 220V ± 5% x 50Hz ± 5% x 1PHSolenoid valve DC 24V |
| Nrụgide ikuku | 5 mmanya ~ 8 mmanya |
| Nrụgide Mmiri Raw | 1 mmanya ~ 3 mmanya |
| Mmiri & Emulsion okpomọkụ | 30°C n'okpuru |
| Emulsion jụrụ ọnụ mmiri olu: | ≥ 20m3x 2sets (Ya na iko fiber jụrụ ụlọ elu≥RT30) |
| Emulsion jụrụ mmiri Flow | ≥ 20m3/Hr |
| Emulsion jụrụ mmiri ebuli | ≥ 30m (ike mgbapụta ≥AC4.0Kw * 2sets) |
| Ihe nju oyi maka HF welder | Igwe nju oyi-mmiri/mmiri mmiri oyi |
| Igwe ikuku axial dị n'ime maka uzuoku welded | ≥ AC0.55Kw |
| Igwe ikuku axial nke dị n'èzí maka uzuoku welded | ≥ AC4.0kw |
4. Ndepụta igwe
| Ihe | Nkọwa | Qty |
| 1 | Semi auto okpukpu abụọ-isi UN-COILER-Mgbasawanye Mandrel site na Pneumatic cylinder-Ya na breeki diski pneumatic | 1 setịpụrụ |
| 2 | STRIP-HEAD Cutter & TIG BUTT WELDER STATION- Mkpacha isi nke pneumatic cylinder- egbe ịgbado ọkụ na-akpaghị aka site na ntuziaka Welder: TIG-315A | 1 setịpụrụ |
| 3 | Igwe kwụ ọtọ- AC 2.2 Kw Site na sistemu njikwa ọsọ inverter - ụdị oghere dị n'ime, a na-edozi obosara site na yinye. | 1 setịpụrụ |
| 4 | Sistemụ njikwa draịva DC nke isi maka ngalaba nhazi/ịhazi-DC 37KWX2-Na DC akara kabinet | 1 setịpụrụ |
| 5 | Isi igwe nke PL-32Z | 1 setịpụrụ |
| Tube Forming Mill- Ntinye nri & ngalaba na-etu ọnụ- mpaghara mgbawa - Fin ngafe mpaghara | 1 setịpụrụ | |
| Mpaghara ịgbado ọkụ- Disk stye seaam ndu nguzo- Mpịakọta ihe nkwusioru (ụdị 2-rola) - Ngalaba scrafing n'èzí (2 pcs kinves) - Kehoraizin onuete igwe kwụ otu ebe | 1 setịpụrụ | |
| Emulsion mmiri jụrụ ngalaba: (1500mm) | 1 setịpụrụ | |
| Tube Sising Mill- ZLY Hard decelerator- Mpaghara nha - nkeji ule ọsọ - isi nke Turkey -Nkwụpụta kwụpụta kwụ ọtọ | 1 setịpụrụ | |
| 6 | Sistemụ welder HF steeti siri ike(XGGP-100-0.4-HC, na ikuku-mmiri ngwa nju oyi) | 1 setịpụrụ |
| 7 | Ahụhụ na-efe efe/Oyi na-efe efe | 1 setịpụrụ |
| 8 | Tebụl ebufe (9m)Ntufu otu akụkụ site na nkwụsị ARC | 1 setịpụrụ |
Ngwakọta akpaaka nke PVC na-ebufe ihe bụ ihe ngwọta ọhụrụ emebere iji mee ka ọ dị mfe na ịhazi usoro ngwakọta nke ntụ ntụ PVC na ihe enyemaka dị iche iche.Site n'iji teknụzụ dị elu na akpaaka dị elu, usoro a na-enyere ndị na-emepụta aka nweta ogo ngwaahịa na arụmọrụ dị elu.
Otu n'ime isi ngwa nke PVC ntụ ntụ bụ mmepụta nke ọkpọkọ ọkpọkọ, profaịlụ, mpempe akwụkwọ, ihe mkpuchi waya na ngwaahịa ihe nkiri.Iji mezuo ihe ndị a kapịrị ọnụ nke ngwaahịa ọ bụla, a ghaghị ịgbakwunye ngwakọta ziri ezi nke ihe mgbakwunye, plasticizers, stabilizers na ihe enyemaka ndị ọzọ.Sistemụ nnyefe ngwa ngwa nke PVC na-eme ka usoro a dị mfe site n'ịtụ ma kesaa ihe mgbakwunye achọrọ, na-ahụ na ihe ndị dị mma maka ịrụ ọrụ ngwaahịa kacha mma.
Ụzọ agwakọta akwụkwọ ntuziaka ọdịnala na-enwekarị nsonaazụ na-ekwekọghị ekwekọ, njehie mmadụ na ntinye oke.N'ụzọ dị iche, PVC akpaka agwakọta na nnyefe usoro ọ bụghị nanị na-ewepụ ihe ịma aka ndị a, ma na-abawanye n'ozuzu mmepụta arụmọrụ.Site na interface enyi na enyi na njikwa nghọta, ndị na-emepụta nwere ike ịtọ ntọala ngwa ngwa, nyochaa usoro ahụ ma mee mgbanwe dịka ọ dị mkpa.Usoro ahụ na-eme ka ọ bụrụ mgbasasị nke ihe mgbakwunye, na-ebelata ihe ize ndụ nke mmebi ngwaahịa ma na-ebuli atụmatụ uru zuru ezu.
Tụkwasị na nke ahụ, PVC na-emepụta ihe na-emepụta ihe na-arụ ọrụ na-arụ ọrụ na-enye mgbanwe na-enweghị atụ, na-enye ndị na-emepụta ihe ohere izute ụdị ngwaahịa dị iche iche.Site na ike mgbanwe ngwa ngwa, ha nwere ike ịgbanwe n'enweghị nsogbu n'etiti usoro dị iche iche iji gboo mkpa ahịa na-agbanwe agbanwe.Ngbanwe a na-ebelata nke ukwuu, na-abawanye mmepụta ike, ma na-enyere aka melite afọ ojuju ndị ahịa.
Njikọ nke teknụzụ ndị na-egbu egbu na-eme ka a mata dosing ziri ezi, ngwakọta a pụrụ ịdabere na ya na njem ihe dị mma.Site n'iji ihe mmetụta dị elu mee ihe, usoro ahụ na-enye nzaghachi ozugbo nke ihe onwunwe, na-eme ka nkesa ziri ezi ma na-ebelata ihe mkpofu.Usoro ngwakọta akpaghị aka anaghị achọ enyemaka mmadụ, na-ebelata ụgwọ ọrụ yana melite nchekwa ebe ọrụ.